ansible-role-bind9/templates/etc/named/named.conf.views.j2

191 lines
7.0 KiB
Django/Jinja

#
# {{ ansible_managed }}
#
{% for view in bind9_views %}
view "{{ view.name }}" {
match-clients {
{% for clients in view.match_clients %}
{{ clients }};
{% endfor %}
};
{% for zone in view.zones %}
zone "{{ zone.origin }}" {
# Hosts which are allowed to issue queries to the server. If not specified all
# hosts are allowed to make queries (defaults to allow-query {any;};
#
# NOTE:
# - The statements may be used in a zone, view or a global options
# clause.
{% if zone.allow_query is defined and zone.allow_query | length > 0 %}
allow-query {
{% for entry in zone.allow_query %}
{{ entry }};
{% endfor %}
};
{% else %}
# allow-query {};
{% endif %}
# allow-query-on defines the server interface(s) from which queries
# are accepted and can be useful where a server is multi-homed,
# perhaps in conjunction with a view clause. Defaults to
# allow-query-on {any;};) meaning that queries are accepted on any
# server interface.
#
# NOTE:
# - The statements may be used in a zone, view or a global options
# clause.
{% if zone.allow_query_on is defined and zone.allow_query_on | length > 0 %}
allow-query {
{% for entry in zone.allow_query_on %}
{{ entry }};
{% endfor %}
};
{% else %}
# allow-query-on {};
{% endif %}
# allow-transfer defines a match list e.g. IP address(es) that are
# allowed to transfer (copy) the zone information from the server
# (master or slave for the zone). The default behavior is to allow
# zone transfers to any host. While on its face this may seem an
# excessively friendly default, DNS data is essentially public (that's
# why its there) and the bad guys can get all of it anyway. However if
# the thought of anyone being able to transfer your precious zone file
# is repugnant, or (and this is far more significant) you are
# concerned about possible DoS attack initiated by XFER requests, then
# use the following policy.
#
# NOTE:
# - This statement may be used in a zone, view or global options clause.
{% if zone.allow_transfer is defined and zone.allow_transfer | length > 0 %}
allow-transfer {
{% for entry in zone.allow_transfer %}
key {{ entry }};
{% endfor %}
};
{% else %}
# allow-transfer {};
{% endif %}
# allow-update defines an address_match_list of hosts that are allowed
# to submit dynamic updates for master zones, and thus this statement
# enables Dynamic DNS. The default in BIND 9 is to disallow updates
# from all hosts, that is, DDNS is disabled by default. This statement
# is mutually exclusive with update-policy and applies to master zones
# only. The example shows DDNS for three zones: the first disables
# DDNS explicitly, the second uses an IP-based list, and the third
# references a key clause. The allow-update in the first zone clause
# could have been omitted since it is the default behavior. Many
# people like to be cautious in case the default mode changes.
#
# NOTE:
# - This statement may be used in a zone, view or an options clause.
{% if zone.allow_update is defined and zone.allow_update | length > 0 %}
allow-update {
{% for entry in zone.allow_update %}
key {{ entry }};
{% endfor %}
};
{% else %}
# allow-update {};
{% endif %}
# allow-update-forwarding defines a match list, for instance,
# IP address(es) that are allowed to submit dynamic updates to
# a 'slave' sever for onward transmission to a 'master'.
#
# NOTE:
# - This statement may be used in zone, view or an options clause.
{% if zone.allow_update_forwarding is defined and zone.allow_update_forwarding | length > 0 %}
allow-update-forwarding {
{% for entry in zone.allow_update_forwarding %}
{{ entry }};
{% endfor %}
};
{% else %}
# allow-update-forwarding {};
{% endif %}
# Defines the file used by the zone in quoted string format, for
# instance, "slave/example.com" - or whatever convention you use. The
# file entry is mandatory for master and hint and optional - but
# highly recommended - for slave and not required for forward zones.
# The file may be an absolute path or relative to directory.
#
# NOTE:
# - If a type Slave has a file statement then any zone transfer
# will cause it to update this file. If the slave is reloaded then
# it will read this file and immediately start answering queries for
# the domain. If no file is specified it will immediately try to
# contact the Master and initiate a zone transfer. For obvious
# reasons the Slave cannot to zone queries until this zone transfer
# is complete. If the Master is not available or the Slave fails to
# contact the Master, ffor whatever reason, the zone may be left with
# no effective Authoritative Name Servers.
file "{{ bind_config_directory }}/{{ zone.file }}";
# master servers
# https://bind9.readthedocs.io/en/latest/manpages.html?highlight=masters#masters
{% if zone.masters is defined and zone.masters | length > 0 %}
masters {
{% for master in zone.masters %}
{{ master.ip }} key {{ master.tsigkey}};
{% endfor %}
};
{% else %}
# masters {};
{% endif %}
# notify behavior is applicable to both master zones (with
# 'type master;') and slave zones (with 'type slave;') and if
# set to 'yes' (the default) then, when a zone is loaded or
# changed, for example, after a zone transfer, NOTIFY messages
# are sent to the name servers defined in the NS records for
# the zone (except itself and the 'Primary Master' name server
# defined in the SOA record) and to any IPs listed in any
# also-notify statement.
#
# If set to 'no' NOTIFY messages are not sent.
# If set to 'explicit' NOTIFY is only sent to those IP(s) listed
# in an also-notify statement.
#
# NOTE:
# - This statement may be specified in zone, view clauses or in a
# global options clause.
notify yes;
# Zones configured for dynamic DNS may use this option to set the
# update method to be used for the zone serial number in the SOA
# record.
#
# With the default setting of serial-update-method increment;, the
# SOA serial number is incremented by one each time the zone is
# updated.
#
# When set to serial-update-method unixtime;, the SOA serial number
# is set to the number of seconds since the Unix epoch, unless the
# serial number is already greater than or equal to that value, in
# which case it is simply incremented by one.
#
# When set to serial-update-method date;, the new SOA serial number
# is the current date in the form “YYYYMMDD”, followed by two
# zeroes, unless the existing serial number is already greater than
# or equal to that value, in which case it is incremented by one.
{% if zone.serial_update_method is defined %}
serial-update-method {{ zone.serial_update_method }};
{% else %}
# serial-update-method [date | increment | unixtime ];
{% endif %}
type {{ zone.type }};
};
{% endfor %}
};
{% endfor %}