ansible-role-bind9/templates/etc/named/named.conf.views.j2

#
# {{ ansible_managed }}
#

{% for view in bind9_views %}
view "{{ view.name }}" {

  match-clients {
{% for clients in view.match_clients %}
    {{ clients }};
{% endfor %}
  };

{% for zone in view.zones %}
  zone "{{ zone.origin }}" {

    # Hosts which are allowed to issue queries to the server. If not specified all
    # hosts are allowed to make queries (defaults to allow-query {any;};
    #
    # NOTE:
    # - The statements may be used in a zone, view or a global options
    #   clause.
{% if zone.allow_query is defined and zone.allow_query | length > 0 %}
    allow-query {
{% for entry in zone.allow_query %}
      {{ entry }};
{% endfor %}
    };
{% else %}
    # allow-query {};
{% endif %}

    # allow-query-on defines the server interface(s) from which queries
    # are accepted and can be useful where a server is multi-homed,
    # perhaps in conjunction with a view clause. Defaults to
    # allow-query-on {any;};) meaning that queries are accepted on any
    # server interface.
    #
    # NOTE:
    # - The statements may be used in a zone, view or a global options
    #   clause.
{% if zone.allow_query_on is defined and zone.allow_query_on | length > 0 %}
    allow-query {
{% for entry in zone.allow_query_on %}
      {{ entry }};
{% endfor %}
    };
{% else %}
    # allow-query-on {};
{% endif %}

    # allow-transfer defines a match list e.g. IP address(es) that are
    # allowed to transfer (copy) the zone information from the server
    # (master or slave for the zone). The default behavior is to allow
    # zone transfers to any host. While on its face this may seem an
    # excessively friendly default, DNS data is essentially public (that's
    # why its there) and the bad guys can get all of it anyway. However if
    # the thought of anyone being able to transfer your precious zone file
    # is repugnant, or (and this is far more significant) you are
    # concerned about possible DoS attack initiated by XFER requests, then
    # use the following policy.
    #
    # NOTE:
    # - This statement may be used in a zone, view or global options clause.
{% if zone.allow_transfer is defined and zone.allow_transfer | length > 0 %}
    allow-transfer {
{% for entry in zone.allow_transfer %}
      key {{ entry }};
{% endfor %}
    };
{% else %}
    # allow-transfer {};
{% endif %}

    # allow-update defines an address_match_list of hosts that are allowed
    # to submit dynamic updates for master zones, and thus this statement
    # enables Dynamic DNS. The default in BIND 9 is to disallow updates
    # from all hosts, that is, DDNS is disabled by default. This statement
    # is mutually exclusive with update-policy and applies to master zones
    # only. The example shows DDNS for three zones: the first disables
    # DDNS explicitly, the second uses an IP-based list, and the third
    # references a key clause. The allow-update in the first zone clause
    # could have been omitted since it is the default behavior. Many
    # people like to be cautious in case the default mode changes.
    #
    # NOTE:
    # - This statement may be used in a zone, view or an options clause.
{% if zone.allow_update is defined and zone.allow_update | length > 0 %}
    allow-update {
{% for entry in zone.allow_update %}
      key {{ entry }};
{% endfor %}
    };
{% else %}
    # allow-update {};
{% endif %}

    # allow-update-forwarding defines a match list, for instance,
    # IP address(es) that are allowed to submit dynamic updates to
    # a 'slave' sever for onward transmission to a 'master'.
    #
    # NOTE:
    # - This statement may be used in zone, view or an options clause.
{% if zone.allow_update_forwarding is defined and zone.allow_update_forwarding | length > 0 %}
    allow-update-forwarding {
{% for entry in zone.allow_update_forwarding %}
      {{ entry }};
{% endfor %}
    };
{% else %}
    # allow-update-forwarding {};
{% endif %}

    # Defines the file used by the zone in quoted string format, for
    # instance, "slave/example.com" - or whatever convention you use. The
    # file entry is mandatory for master and hint and optional - but
    # highly recommended - for slave and not required for forward zones.
    # The file may be an absolute path or relative to directory.
    #
    # NOTE:
    # - If a type Slave has a file statement then any zone transfer
    #   will cause it to update this file. If the slave is reloaded then
    #   it will read this file and immediately start answering queries for
    #   the domain. If no file is specified it will immediately try to
    #   contact the Master and initiate a zone transfer. For obvious
    #   reasons the Slave cannot to zone queries until this zone transfer
    #   is complete. If the Master is not available or the Slave fails to
    #   contact the Master, ffor whatever reason, the zone may be left with
    #   no effective Authoritative Name Servers.
    file "{{ bind_config_directory }}/{{ zone.file }}";

    # master servers
    # https://bind9.readthedocs.io/en/latest/manpages.html?highlight=masters#masters
{% if zone.masters is defined and zone.masters | length > 0 %}
    masters {
{% for master in zone.masters %}
      {{ master.ip }} key {{ master.tsigkey}};
{% endfor %}
    };
{% else %}
    # masters {};
{% endif %}

    # notify behavior is applicable to both master zones (with
    # 'type master;') and slave zones (with 'type slave;') and if
    # set to 'yes' (the default) then, when a zone is loaded or
    # changed, for example, after a zone transfer, NOTIFY messages
    # are sent to the name servers defined in the NS records for
    # the zone (except itself and the 'Primary Master' name server
    # defined in the SOA record) and to any IPs listed in any
    # also-notify statement.
    #
    # If set to 'no' NOTIFY messages are not sent.
    # If set to 'explicit' NOTIFY is only sent to those IP(s) listed
    # in an also-notify statement.
    #
    # NOTE:
    # - This statement may be specified in zone, view clauses or in a
    #   global options clause.
    notify yes;

    # Zones configured for dynamic DNS may use this option to set the
    # update method to be used for the zone serial number in the SOA
    # record.
    #
    # With the default setting of serial-update-method increment;, the
    # SOA serial number is incremented by one each time the zone is
    # updated.
    #
    # When set to serial-update-method unixtime;, the SOA serial number
    # is set to the number of seconds since the Unix epoch, unless the
    # serial number is already greater than or equal to that value, in
    # which case it is simply incremented by one.
    #
    # When set to serial-update-method date;, the new SOA serial number
    # is the current date in the form “YYYYMMDD”, followed by two
    # zeroes, unless the existing serial number is already greater than
    # or equal to that value, in which case it is incremented by one.
{% if zone.serial_update_method is defined %}
    serial-update-method {{ zone.serial_update_method }};
{% else %}
    # serial-update-method [date | increment | unixtime ];
{% endif %}

    type {{ zone.type }};

  };
{% endfor %}

};
{% endfor %}