With `cloudnativePG` in place, the bundled Bitnami `postgresql` sub-chart is the second in-chart way to run a
database, and the worse one. It is a single, non-HA instance without failover, backup or managed major-version
upgrades, and it ships images that Bitnami no longer distributes freely. Keeping it around means maintaining two
code paths for the same job, including the mutual-exclusion assertion between both dependencies and a second set
of DNS, credential and image helpers.
Removing it leaves exactly two supported choices: a CloudNativePG `Cluster` rendered by this chart, or an
external database configured via `gitea.config.database`. Both scale from a single instance to a HA setup -
`cloudnativePG.instances=1` covers the use case the `postgresql` sub-chart served - so nothing is lost besides
the duplication.
BREAKING CHANGE: The `postgresql` sub-chart and all `postgresql.*` values have been removed. There is no
in-place migration path: dump the database of the old `postgresql` release with `pg_dump`, remove the
`postgresql` values, deploy the chart with `cloudnativePG.enabled=true` and restore the dump. Alternatively
point `gitea.config.database` at an externally managed database. Setting `postgresql` now fails the release with
a pointer to the changelog.
Co-authored-by: Copilot <copilot@github.com>
The bundled `postgresql-ha` sub-chart was the only HA-ready database option, but it pinned us to a Bitnami chart
whose images are no longer freely distributed, and it bundled repmgr and pgpool into the release. Operating a
Postgres cluster through a Helm release also means the chart has to reimplement failover, backup and upgrade
orchestration that a dedicated operator already solves.
CloudNativePG is the de-facto standard operator for Postgres on Kubernetes and handles instance management,
streaming replication, switchover and rolling upgrades itself. The operator is deliberately *not* part of this
chart: cluster-scoped CRDs and controllers do not belong into an application release and would conflict with an
operator that is already installed. The chart only renders the namespaced `Cluster` resource, so the operator can
be managed independently.
Because the operator cannot be assumed to be present, `cloudnativePG.enabled` defaults to `false`. Existing users
of `postgresql` or an external database are therefore unaffected.
Credentials follow the chart-wide `secrets.*` convention. Only the password is read from a Secret, because
CloudNativePG requires `bootstrap.initdb.database` and `bootstrap.initdb.owner` as literals in the `Cluster` spec
and cannot resolve them from a Secret. The password is injected into the `init-app-ini` container as
`GITEA__database__PASSWD` instead of being written into the generated `app.ini`.
BREAKING CHANGE: The `postgresql-ha` sub-chart and all `postgresql-ha.*` values have been removed. There is no
in-place migration path between the two deployments: dump the database of the old `postgresql-ha` release with
`pg_dump`, remove the `postgresql-ha` values, deploy the chart with `cloudnativePG.enabled=true` and restore the
dump. Setting `postgresql-ha` now fails the release with a pointer to the changelog.
Co-authored-by: Copilot <copilot@github.com>
`scripts/act_runner/token.sh` bootstrapped the registration token of an act runner by patching a Kubernetes Secret
with kubectl. The deployment it belonged to is long gone, and no glob picked the file up either: the chart only ships
`scripts/init-containers/config/*.sh` and `scripts/init-containers/init/*.sh`, so the script was not even part of the
packaged chart.
The label helpers `gitea.labels.actRunner` and `gitea.selectorLabels.actRunner` were orphaned the same way. The former
is referenced by no template at all and the latter only by the former, which left them as a closed loop without an
entry point.
Co-authored-by: Copilot <copilot@github.com>
Every chart-managed init container already exposes its own `volumeMounts` through the linked configuration block, so
`extraInitVolumeMounts` added a second way to express the same thing. It was also the only mount setting left outside
of `deployment`, which made the mount configuration harder to discover than it needed to be.
Worse, the name promised more than it delivered. The value was only injected into the four linked init containers and
never reached an init container added through `deployment.initContainers[].container`, even though that is exactly
what a reader would expect from a setting called "extra init volume mounts". The documented use case does not need
the fan-out either: the sample `initPreScript` copies the Postgres client certificate onto the `data` volume, so a
single mount on `deployment.initDirectories.volumeMounts` is enough and the later containers pick it up via /data.
With the value gone the `gitea.init-additional-mounts` helper has no purpose left and is removed together with its
four call sites, which now rely on the already existing `volumeMounts` block of the respective init container.
Co-authored-by: Copilot <copilot@github.com>
`extraVolumeMounts` was deprecated in 6.0.0 in favour of separate mounts for the init phase and the runtime container,
but it was never removed. It had turned into a trap: both helpers treated it as a fallback that silently disappeared as
soon as `extraInitVolumeMounts` respectively `deployment.gitea.volumeMounts` contained a single entry, so adding one
new mount could unmount everything configured through the old value. The documented successor
`extraContainerVolumeMounts` had meanwhile been removed itself, which left the deprecation note pointing at a value
that already fails the deprecation check.
Removing it makes the mount configuration explicit: `extraInitVolumeMounts` for the init containers,
`deployment.gitea.volumeMounts` for the Gitea container, and both when a volume is needed in both places.
The GPG init container used `extraVolumeMounts` directly instead of the shared helper and therefore ignored
`extraInitVolumeMounts`, unlike the three other init containers. It now uses `gitea.init-additional-mounts` as well.
Co-authored-by: Copilot <copilot@github.com>
The previous notation mixed two concerns in a single flat dict: `create`/`name` decided whether the chart manages the
ServiceAccount or only references an externally provided one, while the remaining keys only ever applied to a
chart-managed ServiceAccount. That made `name` ambiguous, because it either renamed the generated object or pointed to a
foreign one, and it forced the deployment to guard the reference with `or .Values.serviceAccount.create
.Values.serviceAccount.name`.
The values are now grouped the same way as `persistence`, which was restructured in dfe087c. `serviceAccount.enabled`
controls whether the pod uses a ServiceAccount at all, `serviceAccount.existingServiceAccount` references an externally
managed object and `serviceAccount.new` holds the properties of the object created by the chart. The templates follow
the established helper layout in `templates/gitea/_serviceAccounts.tpl`.
Two latent bugs are fixed along the way. The annotation helper was defined as `gitea.secret.admin.annotations`, so the
`gitea.serviceAccount.annotations` include in the template never resolved. And the duplicated name helper
`gitea.serviceAccountName` in `templates/_helpers.tpl` is removed in favour of `gitea.serviceAccount.name`.
BREAKING CHANGE:
- `serviceAccount.create` does no longer exist. Use `serviceAccount.enabled` instead. The default changed from `false`
to `true`, so a ServiceAccount is now created unless it is explicitly disabled.
- `serviceAccount.name` does no longer exist. Use `serviceAccount.existingServiceAccount.enabled` together with
`serviceAccount.existingServiceAccount.existingServiceAccountName` to reference an externally managed ServiceAccount.
- `serviceAccount.annotations`, `serviceAccount.labels`, `serviceAccount.automountServiceAccountToken` and
`serviceAccount.imagePullSecrets` moved below `serviceAccount.new`.
Co-authored-by: Copilot <copilot@github.com>
The flat `persistence` dict mixed three concerns: whether persistence is used at all, whether the chart creates the
PersistentVolumeClaim, and how that claim is shaped. The pairs `create`/`claimName` and `enabled`/`mount` were only
meaningful in certain combinations, so an invalid configuration such as `create=true` together with a foreign
`claimName` was silently accepted. The same split into an `existingX`/`new` pair is already used for the Secrets, so
this aligns persistence with the rest of the chart.
`persistence.enabled` now only decides whether a volume is used at all. `persistence.existingPersistentVolumeClaim`
points at a claim managed outside of the chart, and everything under `persistence.new` describes the claim the chart
creates itself. Rendering and naming move into `templates/gitea/_persistentVolumeClaims.tpl` so the Deployment and the
PersistentVolumeClaim derive the claim name from a single helper instead of repeating the value lookups.
Support for `global.storageClass` is dropped. It was a chart-wide override that silently applied to the Gitea claim and
was evaluated through `tpl`, which made the effective storage class hard to predict. The storage class is now set
explicitly via `persistence.new.storageClassName`, which also matches the field name in the PersistentVolumeClaim spec.
BREAKING CHANGE: The `persistence` values were restructured and `global.storageClass` was removed.
- `persistence.create` and `persistence.mount` are gone. Set `persistence.enabled` to use a volume and
`persistence.existingPersistentVolumeClaim.enabled` to reuse a claim that is not managed by the chart.
- `persistence.claimName` moves to `persistence.existingPersistentVolumeClaim.persistentVolumeClaimName`. A claim
created by the chart is now named after `gitea.fullname` instead of the default `gitea-shared-storage`.
- `persistence.accessModes`, `annotations`, `labels`, `size` and `subPath` move into `persistence.new`.
- `persistence.volumeName` becomes `persistence.new.persistentVolumeName`.
- `persistence.storageClass` and `global.storageClass` become `persistence.new.storageClassName`.
- `persistence.enabled` now defaults to `false`.
Co-authored-by: Copilot <copilot@github.com>
The PodSpec `hostUsers` field has nothing to do with the OpenShift compatibility profile. It only selects whether the
pod shares the host's user namespace, which is a plain Kubernetes feature. Nesting it below `openshift` implied that it
requires OpenShift and, worse, the helper only rendered it when `openshift.enabled` evaluated to `true`, so the setting
was silently ignored on vanilla Kubernetes clusters.
`gitea.hostUsers` now reads `deployment.hostUsers` and no longer depends on the OpenShift profile. The value is only
rendered when it is an actual boolean, so the field stays omitted for `null` and the platform default applies.
BREAKING CHANGE: `openshift.hostUsers` has been removed. Configure `deployment.hostUsers` instead.
Co-authored-by: Copilot <copilot@github.com>
The chart-managed init containers were hardcoded inside `deployment.yaml`. Their image, environment, resources,
security context and volume mounts could not be adjusted individually, and custom init containers could only be
prepended or appended as a whole via `preExtraInitContainers`/`postExtraInitContainers`.
The init containers are now rendered from `deployment.initContainers`, an ordered list whose entries either `link` a
chart-managed init container (`initDirectories`, `initAppIni`, `initConfigureGPG`, `initConfigureGitea`) or provide a
free-form `container` definition. This allows custom containers at any position and makes the execution order
explicit. Each linked init container has its own configuration block in `values.yaml` and falls back to
`deployment.gitea.securityContext` and `initContainers.resources` when unset.
To support per-container images, `gitea.image` was split into the generic helper `gitea.image.name`, which renders an
arbitrary `image` dict instead of only `deployment.gitea.image`.
The pod annotations moved from `deployment.yaml` into the new helper `gitea.pod.annotations`. The SHA sum annotations
now also cover user-provided Secrets: their content is unknown to the chart, so the Secret is read from the cluster via
Helm's `lookup` function. Chart-managed Secrets keep using the rendered manifest, because the cluster still holds their
pre-upgrade state during rendering.
Because `lookup` requires `get` permission on Secrets and silently returns nothing during client-side rendering
(`helm template`, `--dry-run`, Argo CD without a live cluster), `addSHASumAnnotation` now defaults to `false`. The
trade-offs are documented in the README so users can make an informed decision.
BREAKING CHANGE: `preExtraInitContainers` and `postExtraInitContainers` have been removed. Add an entry with a
`container` key before or after the linked init containers in `deployment.initContainers` instead.
BREAKING CHANGE: `secrets.<secret>.addSHASumAnnotation` now defaults to `false`. Set it to `true` explicitly to keep
the rollout trigger on Secret changes.
Co-authored-by: Copilot <copilot@github.com>
Both values are Deployment-scoped: `extraVolumes` is rendered into `spec.template.spec.volumes` and
`extraContainerVolumeMounts` only into the volumeMounts of the Gitea container. The `extra*` prefix said
nothing about that scope and left them sitting at the top level, far away from the pod- and container-scoped
settings that already live under `deployment` and `deployment.gitea`.
They therefore become `deployment.volumes` and `deployment.gitea.volumeMounts`, which makes the target
resource and container obvious from the values path alone and continues the consolidation started with
`deployment.gitea.env`, `deployment.gitea.image`, `deployment.gitea.resources` and the security contexts.
`extraInitVolumeMounts` stays where it is for now, because it targets the init containers rather than the
Gitea container. The deprecated `extraVolumeMounts` fallback is kept intact and now points at
`deployment.gitea.volumeMounts` in its documentation.
Both removed keys are covered by the deprecation check, because silently ignoring them would drop mounted
TLS certificates, custom themes or client certs and leave Gitea running with a broken or unexpected
configuration.
BREAKING CHANGE: `extraVolumes` and `extraContainerVolumeMounts` no longer exist. Use `deployment.volumes`
and `deployment.gitea.volumeMounts` instead. Installations that still set the old keys will fail to render
unless `checkDeprecation` is set to `false`.
Co-authored-by: Copilot <copilot@github.com>
`securityContext` was deprecated when the chart split it into a pod-level and a container-level value. It
only ever acted as a fallback for the runtime container: when the container-level value was empty, the
deprecated map was used instead. That fallback silently changed behaviour depending on whether an unrelated
value happened to be set, and it kept a third security-related values path alive next to
`deployment.securityContext` and `deployment.gitea.securityContext`.
With the fallback gone, `gitea.runtimeContainerSecurityContext` was identical to
`gitea.containerSecurityContext`, so the helper was dropped and the Gitea container now reuses the shared
one. A deprecation check fails the render when the removed value is still set, because silently ignoring it
would drop `runAsUser`, `runAsNonRoot` or the capability set and let the container run with weaker
restrictions than intended.
BREAKING CHANGE: `securityContext` no longer exists. Use `deployment.securityContext` for the pod-level and
`deployment.gitea.securityContext` for the container-level security context. Installations that still set
`securityContext` will fail to render unless `checkDeprecation` is set to `false`.
Co-authored-by: Copilot <copilot@github.com>
`podSecurityContext` and `containerSecurityContext` are both Deployment-scoped: the former is rendered into
`spec.template.spec.securityContext`, the latter into the securityContext of the Gitea container and the
chart-managed init containers. Keeping them at the top level hid that pod/container distinction behind a
naming convention and separated them from the other pod- and container-scoped settings that already live
under `deployment` and `deployment.gitea`.
`podSecurityContext` therefore becomes `deployment.securityContext` and `containerSecurityContext` becomes
`deployment.gitea.securityContext`, which makes the scope obvious from the values path alone and continues
the consolidation started with `deployment.gitea.env`, `deployment.gitea.resources` and
`deployment.gitea.image`.
The template helpers keep their argument-based signatures, because `gitea.containerSecurityContext` is also
used by the Helm test pod and is not bound to a single values path.
Both removed keys are covered by the deprecation check so that a silently dropped security context cannot
lead to containers unexpectedly running as root or without the configured capability set.
BREAKING CHANGE: `podSecurityContext` and `containerSecurityContext` no longer exist. Use
`deployment.securityContext` and `deployment.gitea.securityContext` instead. Installations that still set
the old keys will fail to render unless `checkDeprecation` is set to `false`.
Co-authored-by: Copilot <copilot@github.com>
The `image` values only ever configured the Gitea container itself — registry, repository, tag, digest,
pull policy and the rootless variant are all consumed by the `gitea` container and its init containers.
Keeping them at the top level suggested a chart-wide scope that never existed and separated them from the
other container-scoped settings that already live under `deployment.gitea` (`env`, `resources`).
Moving the block makes the container configuration self-contained and continues the consolidation of all
pod- and Deployment-scoped values under the `deployment` dict.
`imagePullSecrets` intentionally stays top-level, because it is a pod-level setting that also applies to
`extraContainers` and is paired with `global.imagePullSecrets`.
BREAKING CHANGE: `image` no longer exists. Use `deployment.gitea.image` instead. Values still set under
`image` are silently ignored, which would drop a pinned `tag` or `digest` and roll out the chart default
(`appVersion`) instead — review your values before upgrading.
Co-authored-by: Copilot <copilot@github.com>
The admin user was the last piece of credential handling that lived outside of the `secrets` section. Worse, it was the
only credential the chart rendered as a plain environment variable value into the Deployment: unless an existing Secret
was referenced, username and password ended up in the pod spec in clear text, readable by anyone who can `get` or
`describe` the Deployment.
`gitea.admin` is therefore removed and fully replaced by `secrets.admin`:
gitea.admin.username -> secrets.admin.new.username
gitea.admin.password -> secrets.admin.new.password
gitea.admin.email -> secrets.admin.new.email
gitea.admin.passwordMode -> secrets.admin.passwordMode
gitea.admin.existingSecret -> secrets.admin.existingSecret.{enabled,secretName}
The chart now always creates a dedicated `<fullname>-admin` Secret and the Deployment consumes `GITEA_ADMIN_USERNAME`,
`GITEA_ADMIN_PASSWORD` and `GITEA_ADMIN_EMAIL` via `secretKeyRef`. This removes the clear text credentials from the pod
spec and makes the chart-managed and the externally provided case behave identically, which previously diverged.
The email address moved into the Secret as well. It used to be interpolated directly into the init script, so changing
it rewrote the init Secret, and an operator handing over admin credentials could not supply it. The key names of an
externally provided Secret are configurable via `secrets.admin.existingSecret.{emailKey,passwordKey,usernameKey}`,
because chart-defined key names cannot be assumed for Secrets managed by an external system such as a secret store.
Admin handling was previously skipped implicitly when neither an existing Secret nor a username and password were set.
This implicit behaviour is replaced by the explicit `secrets.admin.enabled` flag, so disabling it no longer requires
blanking out unrelated values.
`gitea.admin.passwordMode` validation moved from `_helpers.tpl` to `_secrets.tpl` as
`gitea.secret.admin.passwordMode` to keep all Secret related helpers in one place. `deprecation.yaml` fails the render
when `gitea.admin` is still set and points to `secrets.admin`.
New test suites cover the rendered admin Secret, the `secretKeyRef` wiring, custom key names of an existing Secret and
the password mode validation. The `secret_admin.yaml` template is registered in every suite that renders the Deployment,
as helm-unittest requires templates referenced via `$.Template.BasePath` to be listed explicitly.
BREAKING CHANGE: The `gitea.admin` object has been removed and is replaced by `secrets.admin`. Rendering fails if
`gitea.admin` is still set. Secrets referenced via `secrets.admin.existingSecret` now additionally require an `email`
key next to `username` and `password`.
Co-authored-by: Copilot <copilot@github.com>
The names of the Secrets rendered by the chart were built inline in each template and, for two of
them, in ad-hoc chart-wide helpers. The same name therefore existed in several places (Deployment
volumes, ServiceMonitor credentials, the Secret templates themselves), which made every rename a
multi-file change and allowed the references to drift apart unnoticed - the Helm unit tests render
one template at a time and cannot detect a mismatching secretName.
All Secret names are now defined once in templates/gitea/_secrets.tpl:
gitea.secret.config.name -> <fullname>-config
gitea.secret.gpg.name -> <fullname>-gpg-key (or signing.existingSecret)
gitea.secret.init.name -> <fullname>-init
gitea.secret.inlineConfig.name -> <fullname>-inline-config
gitea.secret.metrics.name -> <fullname>-metrics
gitea.gpg-key-secret-name and gitea.metrics-secret-name are removed from _helpers.tpl accordingly.
A checksum/inlineConfig pod annotation is added as well. After the inline configuration had been
split out of secret_config.yaml, changes to it were no longer covered by any checksum annotation and
did not trigger a rollout of the Deployment.
Finally the metadata attributes of the Secret templates are sorted alphabetically as required by the
chart conventions.
BREAKING CHANGE: two Secrets are renamed. The config Secret changes from <fullname> to
<fullname>-config and the metrics Secret from <fullname>-metrics-secret to <fullname>-metrics. Helm
replaces both on upgrade; references to them from outside the chart have to be adjusted.
Co-authored-by: Copilot <copilot@github.com>
Migrate from bitnamicharts/valkey (and bitnamicharts/valkey-cluster) to the official Valkey Helm chart (https://valkey.io/valkey-helm, v0.10.0).
Changes:
- Remove valkey-cluster dependency and all related values, templates, and unit tests
- Update valkey dependency to use https://valkey.io/valkey-helm
- Adapt _helpers.tpl (valkey.dns, valkey.port, valkey.servicename) to the new chart's service naming and value structure
- Update values.yaml to match the new chart's configuration schema (auth.aclUsers instead of global.valkey.password, service.port instead of primary.service.ports.valkey, dataStorage instead of
primary.persistence)
- Update all affected unit tests
- Update README documentation
BREAKING CHANGE: valkey-cluster support has been removed. Users previously relying on valkey-cluster must migrate to standalone valkey or an external Redis-compatible service. The valkey values structure
has changed: `valkey.global.valkey.password` is now `valkey.auth.aclUsers.default.password`, and `valkey.primary.service.ports.valkey` is now `valkey.service.port`.
---------
Co-authored-by: rishub <183523+rishub@noreply.gitea.com>
Co-authored-by: rishub <itsrishub@gmail.com>
Reviewed-on: https://gitea.com/gitea/helm-gitea/pulls/1097
Co-authored-by: Markus Pesch <markus.pesch@cryptic.systems>
Add full Gateway API support for exposing Gitea via HTTPRoute, TCPRoute, BackendTLSPolicy, and ClientSettingsPolicy resources.
New templates:
- `httpRoute.yaml` — renders an HTTPRoute with configurable
parentRefs, hostnames, and rules (defaults to PathPrefix `/`)
- `tcpRoute.yaml` — renders a TCPRoute for SSH traffic
- `backendTLSPolicy.yaml` — renders a BackendTLSPolicy for
encrypted backend connections with required validation config
- `clientSettingsPolicy.yaml` — renders an NGINX Gateway Fabric
ClientSettingsPolicy to raise the request body size limit
Infrastructure:
- `gatewayAPI.enabled` global toggle gates all resources
- Resources grouped under `gatewayAPI.core.*` and `gatewayAPI.nginx.*`
- Helper templates extracted into dedicated `_*.tpl` files
- Service name helpers (`gitea.service.http.name`, `gitea.service.ssh.name`)
extracted into `_services.tpl`; service templates renamed to camelCase
- `ROOT_URL`, `DOMAIN`, and `SSH_DOMAIN` auto-resolve from
`httpRoute.hostnames[0]`; `httpRoute.tls` switches to `https`
Documentation:
- New `docs/gateway-api.md` with topology examples, BackendTLSPolicy
setup, sectionName guidance, SSH considerations, and NGINX body
size limit configuration
- `.github/copilot-instructions.md` with project conventions
- README parameter table auto-generated via `make readme`
Tests:
- Helm unit tests for all four new resource templates
- Config tests for hostname/TLS resolution from Gateway API values
Co-authored-by: Todd Marimon <toddmarimon@gmail.com>
### Description of the change
Add options to values.yaml to make chart easier to install in restricted openshift environments
### Benefits
more people can run this
### Checklist
<!-- [Place an '[X]' (no spaces) in all applicable fields. Please remove unrelated fields.] -->
- [x] Parameters are documented in the `values.yaml` and added to the `README.md` using [readme-generator-for-helm](https://github.com/bitnami-labs/readme-generator-for-helm)
- [ ] Breaking changes are documented in the `README.md`
- [x] Helm templating unittests are added (required when changing anything in `templates` folder)
- [ ] Bash unittests are added (required when changing anything in `scripts` folder)
- [x] All added template resources MUST render a namespace in metadata
---------
Co-authored-by: Lunny Xiao <xiaolunwen@gmail.com>
Reviewed-on: https://gitea.com/gitea/helm-gitea/pulls/1063
Reviewed-by: Lunny Xiao <xiaolunwen@gmail.com>
Co-authored-by: techknowlogick <techknowlogick@gitea.com>
Co-committed-by: techknowlogick <techknowlogick@gitea.com>
For rootful Gitea images, the built-in OpenSSH server is reused, and Gitea itself does not listen on any SSH port. Therefore, the `SSH_LISTEN_PORT` setting has no effect. Explicitly setting `START_SSH_SERVER` helps avoid confusion and makes the behavior clearer.
Reviewed-on: https://gitea.com/gitea/helm-gitea/pulls/876
Reviewed-by: pat-s <pat-s@noreply.gitea.com>
Co-authored-by: Lunny Xiao <xiaolunwen@gmail.com>
Co-committed-by: Lunny Xiao <xiaolunwen@gmail.com>
### Description of the change
Redesigned ingress configuration to align better with implicit best practices.
### Benefits
- Smarter defaults
- More tests
- Remove [deprecated API Versions](extensions/v1beta1) (e.g. `extensions/v1beta1`) and always use `networking.k8s.io/v1`
### Possible drawbacks
Hopefully 🙃 none
### Applicable issues
fix#674
### Additional information
- Define `ingress.annotations` via helpers
- Move tests from `tests/deployment` to `tests/ingress`
- Use own tests file for ingress tpl tests
- Ensure defaults of `path` and `pathType` are always rendered
- Set top-level default value for `ingress. pathType`
- Change default of `ingress.hosts[0].paths` to `[]` to ensure proper rendering via template
### âš BREAKING
I think all of these changes should be backward comp with existing ingress definitions, but surely worth highlighting in the changelog of the release.
### Checklist
<!-- [Place an '[X]' (no spaces) in all applicable fields. Please remove unrelated fields.] -->
- [x] Parameters are documented in the `values.yaml` and added to the `README.md` using [readme-generator-for-helm](https://github.com/bitnami-labs/readme-generator-for-helm)
- [x] Breaking changes are documented in the `README.md`
- [x] Templating unittests are added
Co-authored-by: justusbunsi <justusbunsi@noreply.gitea.com>
Co-authored-by: justusbunsi <sk.bunsenbrenner@gmail.com>
Reviewed-on: https://gitea.com/gitea/helm-gitea/pulls/679
Co-authored-by: pat-s <patrick.schratz@gmail.com>
Co-committed-by: pat-s <patrick.schratz@gmail.com>
<!--
Before you open the request please review the following guidelines and tips to help it be more easily integrated:
- Describe the scope of your change - i.e. what the change does.
- Describe any known limitations with your change.
- Please run any tests or examples that can exercise your modified code.
Thank you for contributing! We will try to review, test and integrate the change as soon as we can.
-->
### Description of the change
Migrates from Redis to Valkey.
### Benefits
The Redis License is changing from BSD-3-Clause to RSALv2 and SSPLv1 which are not open source under the OSI definition. We should consider open-source alternatives as a default replacement for Redis.
### Possible drawbacks
Large scale change, potentially breaking.
### Applicable issues
https://github.com/go-gitea/gitea/issues/32056
### âš BREAKING
Major version change, redis provider changed to valkey.
### Checklist
<!-- [Place an '[X]' (no spaces) in all applicable fields. Please remove unrelated fields.] -->
- [X] Parameters are documented in the `values.yaml` and added to the `README.md` using [readme-generator-for-helm](https://github.com/bitnami-labs/readme-generator-for-helm)
- [X] Breaking changes are documented in the `README.md`
- [X] Helm templating unittests are added (required when changing anything in `templates` folder)
Co-authored-by: pat-s <patrick.schratz@gmail.com>
Reviewed-on: https://gitea.com/gitea/helm-gitea/pulls/775
Reviewed-by: pat-s <pat-s@noreply.gitea.com>
Co-authored-by: Sean Teo <sawntoe@gmail.com>
Co-committed-by: Sean Teo <sawntoe@gmail.com>
### Benefits
Can protect metrics endpoint with `Bearer` token authentication provided by gitea.
see PR #637 for previous discussion.
### Possible drawbacks
No possible drawbacks
### Applicable issues
- fixes#635
### Additional information
```
gitea:
metrics:
enabled: true
token: "somepassword"
serviceMonitor:
enabled: true
```
Using above configuration is sufficient to secure /metrics endpoint with bearer token and corresponding ServiceMonitor.
### Checklist
- [x] Parameters are documented in the `values.yaml` and added to the `README.md` using [readme-generator-for-helm](https://github.com/bitnami-labs/readme-generator-for-helm)
- [ ] ~~Breaking changes are documented in the `README.md`~~ Not applicable
- [x] Templating unittests are added
Signed-off-by: Hitesh Nayak <hiteshnayak305@gmail.com>
Reviewed-on: https://gitea.com/gitea/helm-chart/pulls/719
Reviewed-by: justusbunsi <justusbunsi@noreply.gitea.com>
Co-authored-by: Hitesh Nayak <hiteshnayak305@gmail.com>
Co-committed-by: Hitesh Nayak <hiteshnayak305@gmail.com>
### Description of the change
This fixes an issue when trying to apply a custom probe that is not `tcpSocket`.
### Benefits
Custom probes 🥳
### Applicable issues
- Fixes#694
### Checklist
- [x] Templating unittests are added
Reviewed-on: https://gitea.com/gitea/helm-chart/pulls/717
Co-authored-by: justusbunsi <sk.bunsenbrenner@gmail.com>
Co-committed-by: justusbunsi <sk.bunsenbrenner@gmail.com>
### Description of the change
This enables sane modes for forcing reset, as well as providing more options to users of the chart by giving them the flexibility to set the mode for password creation/modification as part of init whether the user exists or not.
### Benefits
The new default should revert to the behavior before #673 became an issue, while also providing more flexibility for users who want to be able to manage their initial admin user password out-of-band after creating it the first time.
### Possible drawbacks
None that I can think of.
### Applicable issues
- fixes#673
### Additional information
See the discussion in #675 as well
### Checklist
- [X] Parameters are documented in the `values.yaml` and added to the `README.md` using [readme-generator-for-helm](https://github.com/bitnami-labs/readme-generator-for-helm)
Reviewed-on: https://gitea.com/gitea/helm-chart/pulls/677
Reviewed-by: justusbunsi <justusbunsi@noreply.gitea.com>
Co-authored-by: James Harmison <jharmison@gmail.com>
Co-committed-by: James Harmison <jharmison@gmail.com>
### Description of the change
Adding support for DRY principle (via use of the TPL function) to the PVC storage class and the ingress class
### Benefits
It allows to reference a variable into another one to avoid duplicating them (or using YAML anchors).
It is useful and valuable when including Gitea into an umbrella chart with multiple components and to have a single variable while the components variable only refer to that single one.
Example 1
```
global:
persistence:
storageClass: "storage-class"
persistence:
storageClass: "{{ .Values.global.persistence.storageClass }}"
```
This results in having `spec.storageClassName` equal to `storage-class` in the PVC object
Example 2
```
global:
ingress:
className: "ingress-class"
ingress:
className: "{{ .Values.global.ingress.className}}"
```
This results in having `spec.ingressClassName` equal to `ingress-class` in the Ingress object
### Possible drawbacks
N/A
### Checklist
- [X] Templating unittests are added
Co-authored-by: 212597596 <cedric.henry@ge.com>
Co-authored-by: pat-s <pat-s@noreply.gitea.com>
Co-authored-by: justusbunsi <justusbunsi@noreply.gitea.com>
Reviewed-on: https://gitea.com/gitea/helm-chart/pulls/664
Reviewed-by: pat-s <pat-s@noreply.gitea.com>
Co-authored-by: Ceddaerrix <ceddaerrix@noreply.gitea.com>
Co-committed-by: Ceddaerrix <ceddaerrix@noreply.gitea.com>
### Description of the change
Add config fallbacks for `session`, `cache` and `queue` including tests.
### Benefits
If users disable the default `redis-cluster` sub-chart dependency, this will configure the respective sections to use the Gitea defaults as listed in https://docs.gitea.com/next/administration/config-cheat-sheet.
### Possible drawbacks
Users will run on non-optimal settings for production without knowing their config.
### Applicable issues
- fixes#584#573#489#476#468#453
### Checklist
<!-- [Place an '[X]' (no spaces) in all applicable fields. Please remove unrelated fields.] -->
- [x] Parameters are documented in the `values.yaml` and added to the `README.md` using [readme-generator-for-helm](https://github.com/bitnami-labs/readme-generator-for-helm)
- [x] Breaking changes are documented in the `README.md`
- [x] Templating unittests are added
Co-authored-by: justusbunsi <sk.bunsenbrenner@gmail.com>
Co-authored-by: justusbunsi <justusbunsi@noreply.gitea.com>
Reviewed-on: https://gitea.com/gitea/helm-chart/pulls/585
Reviewed-by: justusbunsi <justusbunsi@noreply.gitea.com>
### Description of the change
This PR is a continuation of the work done by @dgershman in [534](https://gitea.com/gitea/helm-chart/pulls/534), to allow users to override the image from the default rootless behavior of appending `-rootless` to the end of the image tag.
### Benefits
Allows more flexibility to use externally maintained images that are rootless but don't follow the `-rootless` tag convention.
### Applicable issues
- fixes#532
### Additional information
No breaking changes. This does not affect the `image.rootless` conditional checks or the current behavior if someone still wants to rely on the chart to append `-rootless`.
### Checklist
- [x] Parameters are documented in the `values.yaml` and added to the `README.md` using [readme-generator-for-helm](https://github.com/bitnami-labs/readme-generator-for-helm)
- [x] Breaking changes are documented in the `README.md`
- [x] Templating unittests are added
Co-authored-by: TristanHoladay <40547442+TristanHoladay@users.noreply.github.com>
Co-authored-by: pat-s <pat-s@noreply.gitea.com>
Reviewed-on: https://gitea.com/gitea/helm-chart/pulls/550
Reviewed-by: justusbunsi <justusbunsi@noreply.gitea.com>
Reviewed-by: pat-s <pat-s@noreply.gitea.com>
Co-authored-by: TristanHoladay <tristanholaday@noreply.gitea.com>
Co-committed-by: TristanHoladay <tristanholaday@noreply.gitea.com>
### Description of the change
Before only `postgresql-ha` was auto-configured WRT to DNS.
### Benefits
Add DNS auto-config for `postgresql` dependency and assert that either `postgresql` or `postgresql-ha` is enabled.
Reviewed-on: https://gitea.com/gitea/helm-chart/pulls/478
Co-authored-by: pat-s <patrick.schratz@gmail.com>
Co-committed-by: pat-s <patrick.schratz@gmail.com>
volker.raschekandCopilot