linux_ws2122_ansible/README.md

39 lines
1.5 KiB
Markdown
Raw Normal View History

2021-12-11 21:50:43 +00:00
# linux_ws2122 - Ansible
2021-12-11 21:46:32 +00:00
Setup gateway and client vm via Ansible. A DHCP and DNS server is installed on
the gateway VM. Issued DHCP leases are transmitted via DDNS as forward and
reverse entry of the zone `linuxws2122.de`.
2021-12-11 21:46:32 +00:00
## Requirements
Requirements or individual adaptations to be able to run the Ansible Playbook:
- Two Fedora 34 VMs are needed (gateway and client). Both receive a network
interface, which are connected to the subnet of the domestic router via the
network bridge `br0` of the host system in order to receive an IP address of the
router. This connection is shown in the network diagram with the colour `orange`.
In addition, both VMs receive a second network interface for internal
communication. The connection is shown in the network diagram in the colour
grey.
- Adapt IP-Addresses of the client and gateway VM in `host_vars`, if the
IP-Addresses are not equal with the pre-defined ones.
- Adapt name of the interfaces for booth VMs in `host_vars`, if the names of the
interface are not equal with the pre-defined ones.
2021-12-11 21:46:32 +00:00
- Configure your Router (Fritz!Box, SpeedPort, ect) to route traffic for
2021-12-11 22:00:38 +00:00
`192.168.181.0/24` via `gateway`.
- Enable password root login with SSH. Set password in `group_vars/all/ansible.yaml`.
- Restart VMs after running the playbook.
## Running the Playbooks
2021-12-11 21:46:32 +00:00
```bash
ansible-playbook -i hosts.yaml gateway.linuxws2122.de.yaml
ansible-playbook -i hosts.yaml client.linuxws2122.de.yaml
```
## Network diagram
![network-diagram](./png/network.png)