Markus Pesch
80d9b714be
All checks were successful
continuous-integration/drone/push Build is passing
39 lines
1.5 KiB
Markdown
39 lines
1.5 KiB
Markdown
# linux_ws2122 - Ansible
|
|
|
|
Setup gateway and client vm via Ansible. A DHCP and DNS server is installed on
|
|
the gateway VM. Issued DHCP leases are transmitted via DDNS as forward and
|
|
reverse entry of the zone `linuxws2122.de`.
|
|
|
|
## Requirements
|
|
|
|
Requirements or individual adaptations to be able to run the Ansible Playbook:
|
|
|
|
- Two Fedora 34 VMs are needed (gateway and client). Both receive a network
|
|
interface, which are connected to the subnet of the domestic router via the
|
|
network bridge `br0` of the host system in order to receive an IP address of the
|
|
router. This connection is shown in the network diagram with the colour `orange`.
|
|
|
|
In addition, both VMs receive a second network interface for internal
|
|
communication. The connection is shown in the network diagram in the colour
|
|
grey.
|
|
|
|
- Adapt IP-Addresses of the client and gateway VM in `host_vars`, if the
|
|
IP-Addresses are not equal with the pre-defined ones.
|
|
- Adapt name of the interfaces for booth VMs in `host_vars`, if the names of the
|
|
interface are not equal with the pre-defined ones.
|
|
- Configure your Router (Fritz!Box, SpeedPort, ect) to route traffic for
|
|
`192.168.181.0/24` via `gateway`.
|
|
- Enable password root login with SSH. Set password in `group_vars/all/ansible.yaml`.
|
|
- Restart VMs after running the playbook.
|
|
|
|
## Running the Playbooks
|
|
|
|
```bash
|
|
ansible-playbook -i hosts.yaml gateway.linuxws2122.de.yaml
|
|
ansible-playbook -i hosts.yaml client.linuxws2122.de.yaml
|
|
```
|
|
|
|
## Network diagram
|
|
|
|
|